1919a4 parts for sale.

[onemgepirn3]

ADDED/changed:
- IZZY bipod new spf
-*price reduced* on USGI bbl extention complete 3@ $30 each
-1919a4 top latch used; complete 8@ $12 each or buy 2 or more for 10.50 each
-top covers stripped with a (1) new lever very very good shape 3@ $22 each
-bottom plate "sg" marked. has a few minor issues but is still very usable I will add lock cam and screw also 1@ $90
MORE PARTS LISTED BELOW

PLEASE READ BEFORE ORDERING: Please only e-mail me with orders at onemgepirn3@columbus.rr.com
Please do not PM me or respond to this post with an order...
E-mail me with an order to check availability and I will e-mail you back asap. I do work full time, have young kids and sleep so it may be next day
before I e-mail you. Please dont post that you e-mailed and didnt get response unless more than 24 hours has gone by.....
I usually charge either $5 or $10 for shipping on all orders depending on size. I try to ship all orders for the $5 flat rate priority shipping.
I, of course, will combine shipping and try to get it there as cheap as possible. If someone else has e-mailed me before you,
then a part may not be available when I answer you back...simple logic but thought I would add that. I will TRY to update availability on this post daily.
Parts:
-bottom plate. NO MARKINGS 1@ $110 each.
NO major problems/issues(no cracks, deep grind marks etc)
- USGI barrel extentions new complete 3@ $30 each
-Izzy barrel extentions new complete 1@ $30 each
-1919a4 Barrel shroud new; no holes drilled 1@ $85
-1919a4 top latch used; complete 10@ $12 each or buy 2 or more for 10.50 each
-breech lock cams new all made/marked "SG" 4@ $8 each (these do not have bolt with them)
-top covers stripped very good shape (izzy mrked, boooo!) 10 @ $18 each
-Firing pins stripped 5@ $5 each
- Accelerator new in the wrap 8@ $6 each
-1917a1 top cover latch new in wrap 5@ $19 each
- 308 front cart stop new or slightly used 7@ $8
-top cover mounting fixed plate new 4@ $2 each
-50bmg ma deuce cocking lever new $10

[mminvestments]

I will take a bolt sear spring and a stripped bolt along with the other parts we talked about for my top covers

[onemgepirn3]

email me with orders

[L999here]

Just ordered and email sent. Hope I made the cut...LOL....please advise final tally....

[Donnerwetter58]

Would like the bolt with parts if available and 308.
Thanks,
Dave

[onemgepirn3]

for anybody that I e-mailed and said that I didnt have stripped bolts, bbl plungers, sear springs, bbl springs or top cover extractor springs...I had some back outs so please re e-mail me. I do have those parts. Im late for work so will try to update the post later today. Thanks

[onemgepirn3]

I also think I returned all e-mails. if not I will very soon. Hope I didnt leave anyone out.

[onemgepirn3]

I updated parts I was sold out on, I will update more later tonight. The parts still listed are available just the quantity may not be right. If I have missed returning any e-mails with shipping or availability. PLEASE e-mail me again. I forgot to reply to some during the day and cannot remember who.

[onemgepirn3]

post should be up to date on availability now. Thanks everyone

[onemgepirn3]

I added one or 2 things and changed prices on a few things