[panaceabeachbum]

I have a few new 1919 semi sideplates avail , these plates are completley machined from 4140 and ready to assemble on your 1919 semi parts set .
$125 +$8.50 S+H to FFL

 

[John Powell]

M11/9 Upper

Sorry to get off topic but when do you expect your M11/9 upper to be available? That is NEAT! Ballpark price??

 

[panaceabeachbum]

still waiting on BATFE to make a rulling on my original submission. I have a slightly more complex version to submit but would really like to get the original one back first

 

[panaceabeachbum]

Here are a couple of pictures of the semi right hand side plates I offer along with a pic of the markings. I have 18 left out of a run of 50

 

[panaceabeachbum]

I also have one side plate that has a little damage on the front inside for sale for $60 + $9 shipping , damage is visible in the pic and doesnt go all the way thru although there is a slight dent on the outside. I dont believe the damage will be visible once assembled. Plate still needs to be de-burred

I have one other blem plate that has the pivot hole for the top cover drilled aprox .010 to far to the rear. This hole can easily be cleaned up with a dremel tool and once assembled will never be a problem and would be covered by the spring and nut. This one needs to be de-burred also , $70 + shipping

 

[mucker]

mucker

Couldn't this plate be used for a F/A gun if the raised rib was milled down to the 3/16s thickness? I'll be receiving my 07 Mfg. license in the next couple of weeks and I'm considering buying a couple of Semi side plates and converting them to F/A. I have several parts kits and want to make up a couple F/A guns for local shoots. Also, are the rivet holes chamfered and if so at what angle 45 degrees, 60 degrees etc?

 

[TORQUE]

I'l take that $60 damaged plate, if I'm 1st in line. TORQUE

 

[muta4warrior]

Couldn't this plate be used for a F/A gun if the raised rib was milled down to the 3/16s thickness? I'll be receiving my 07 Mfg. license in the next couple of weeks and I'm considering buying a couple of Semi side plates and converting them to F/A. I have several parts kits and want to make up a couple F/A guns for local shoots. Also, are the rivet holes chamfered and if so at what angle 45 degrees, 60 degrees etc?

Don't forget to also have your SOT in hand before converting it.


ETA: I'll take the second plate for $70 pls shipping.

 

[MSG]

.... Plate still needs to be de-burred....

Why? It just looks like one of the old OOW plates.

MSG

 

[cal1320]

I will take a production one if they are still available. PM or e mail me so we can exchange info.
Thanks, Calvin

 

[kzguns]

I'll take one PM sent.

 

[WS556]

Side plate:

I'll take a production one!

PM Sent