[master22nl]

check out the pic,s i posted today 8/16/2016 found a few more extractors

i again did find some 1919 extractors, some are stil NEW wrapped in paper
no need to say these are almost impossible to find
can do $ 100. a piece shipped,
then i also have a bunch that have seen sligth use, so not new one,s but stil GOOD !!! about 12 available !!!
i can do 90 dollar a piece on the used one,s shipped !!

so NOS packed one,s 100 dollar shipped, have about 7 available


used one,s 90 dollar shipped,
then i also have 2 different one,s these are pictured seperat, one has a less longer pin, the other is not 1919a4 i think
but dont know to witch model this belongs
i aint gonna do handpicking, most are marked B pre BA ore SG,

wil do this the same way as before, thirst come, first serve
payment by money order to a friend in perkasie PA
iff anyone out there stil need ore want these, be quick and put a reply at this post
write down what exactly you want and how many !!!
ore send me a PM
i wil contact you with details,
again extractors, original one,s not reproduction
regards, john

 

[fastmonkey87]

The one you have in picture 2 on the bottom appears to be m37. Can you show a picture of the top and side of it? If it is I would be interested.

Thanks Kyle

 

[master22nl]

here you go

as asked..

this one looks to be nos also, wil take 100 dollar shipped

 

[master22nl]

"oldsoldier" was the first one who responded about the extractor with the longer pin in the second pic.
for now it,s sold to him, iff not i wil continue to the second one who replied
i think it,s wiser to reply here on the board so everyone can see who,s in line
i dont mind getting PM,s send but it,s more honest that all can see who replied thirst, second, third etc.etc

 

[fastmonkey87]

It is definitely an M37 extractor.

I do not think that it is, the markings looked like anm2 to me so I pulled out both a m37 and a anm2 extractor to compare and it doesn't match either, there are several design differences. I am not sure what it goes to now

 

[fjruple]

Guys--

I believe its a dual feed FN38 extractor.

--fjruple

 

[Lucky#13]

Guys--

I believe its a dual feed FN38 extractor.

--fjruple

Right on the money. Not sure which FN model, or if those even vary. But it looks exactly like the FN30 ones I have seen. Just for clarity, this is the M37 Extractor:

 

[paintmanmatt]

John, do you still have extractors available? A couple of guys over on another forum are looking for some. Feel free to message me and maybe I can get your info to them.

Thanks, Matt

 

[Mr.Maim]

john, do you still have extractors available? a couple of guys over on another forum are looking for some. Feel free to message me and maybe i can get your info to them.

Thanks, matt

there are other forums?!?!

 

[Lucky#13]

there are other forums?!?!

No, there are no other forums! Not militarybeltfed.com, nor weaponeer.net, nor weaponsguild.com.

No, there are no other sites....

 

[paintmanmatt]

there are other forums?!?!

Ooops! I meant to say Individuals in an undisclosed location! :rofl:

 

[master22nl]

1919 extractors bump

bump..........

still have only a few NOS packed one,s for sale
and about a dozen that show slight use but in good condition
you can check prizes on top...

ps. i had people asking, but i DO NOT have any of the M37 type,s available, only 1919.

 

[stingray656667]

extractors

Are any of the 1919A4 extractors still available?

stingray656667

 

[stingray656667]

extractors

If any are still available, you can email me at FrankEdwardSamTomEdwardNickOscarATmsn.com. Thanks.

stingray656667

 

[master22nl]

hy sorry, must have overlooked your response
YES i stil have some original extractors available
i have send you an e-mail to the adress you provided
thanks,

 

[magnet69]

I'll take 2 NOS or whatever is available. Pm w info sent. Thanks

 

[master22nl]

for now ALL the nos extractors are sold, ore pending funds
available are the one,s that have slight use
so stil have extractors available
check top of the page for more details

 

[WT-54-CU-.9-LOADED]

Would like to buy an extractor assembly if they are not sold out. New or used You can just pm me. Thanks

 

[master22nl]

hy PM send, thanks, john

 

[master22nl]

found a few more extrators, see pic,s

found a few more,... these are also $ 100.- shipped to your doorstep, i took 2 pictures of each
they are numbered 1 2 and 3, please write clearly witch number you want,
when markings are present i also wrote that down, like BA one extractor 1 and the letter P on number 2 and 3
thanks, john

see pic,s