8mm chamber reamer for throating?

1480 Views 3 Replies 4 Participants Last post by loboslanding, Mar 31, 2008

cmw

Discussion Starter · Mar 31, 2008

Hi all,

Just wondering what to do about adapting an ammunition store (IIRC) barrel to handle Yugo 8mm.

Putting a round into the bare barrel shows some resistance and magic marker on the bullet indicates the ogive is rubbing on the lands.

So the thing to do is twist a reamer with a longer throat in there -correct?

And then the question becomes where to get said reamer...

Thanks for any and all comments.

C

Save

1 - 1 of 4 Posts

JOHN B MCGUIRE

· #3 · Mar 31, 2008

Throating reamer John McGuire

I have one you can borrow. If you will pay shipping. Reamer cost a 200 dollars so it needs to be insured. Don't shoot the Yugo ammo in that barrel unless you go through and separate it by dropping it in the barrel. Just email me if you want to borrow the reamer.

John McGuire
[email protected]

Save

1 - 1 of 4 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month