1919 A4 Forums banner
1 - 20 of 25 Posts

·
Registered
Joined
·
2,930 Posts
Discussion Starter · #1 · (Edited)
This is what's left of the small spare parts I collected over the last 6-8 years of working on the Stinger project .
They are for sale . First " I'll take it " post gets the item . All are USGI ANM2 parts.


http://s296.photobucket.com/user/emmagee1917/media/small parts/DSCF0015_zpsqxwev4yk.jpg.html
Two belt feed slides,,,,,,,complete......sold ..... Stripped.......$30.00 SPF


http://s296.photobucket.com/user/emmagee1917/media/small parts/DSCF0012_zps3clohvqh.jpg.html
..... One sear .....$30.00 SPF


Shipping will depend on how you want it . A USPS flat rate box will hold them for $7.00 per order , prob'ly best way to go .
Thanks , Chris
 

·
Registered
Joined
·
1,460 Posts
I'll take an extractor and firing pin for sure. Let me inspect the kit, should take more.

Do you have a price for the whole lot?
 

·
Registered
Joined
·
2,930 Posts
Discussion Starter · #3 ·
Every thing comes to $530 by my addition . Everything is about 1/2 or so from found prices . For you , though , I'll do $450 for all .

Everyone can claim their wants , if Karl_T says he wants all , he'll get it . If not in a couple of days , the item will go to the next " I want it " .

Karl , the black or in-the-white extractor ?
Also note the firing pin has no spring in it , do you want that , too ? ( item on hold till answer )
Chris
 

·
Registered
Joined
·
1,460 Posts
I'll take the black extractor and can use a spring with the firing pin.

Don't want to commit on anything else till I see the kit.

Karl
 

·
Registered
Joined
·
2,930 Posts
Discussion Starter · #5 ·
That's Ok then , we'll talk again about what's left then . The kit is like NOS . One of the two was still in the cosmo when I got it and I rigged one up to fire single shot to test sight placement . I cannot tell which was which in cosmo nor which was the one I took out .

The sale is back open , Gentlemen .
So far , we have :

Blk extractor , firing pin , and firing pin spring SPF to Karl_T .
30+30+10+6 = $76

In-the -white Extractor and breach cam lock SPF to Luis. I'll PM you the requested Pics in a while.
30 + 40 + 6= $76

Well what about that ? I see a pattern forming .

Chris
 

·
Registered
Joined
·
847 Posts
Chris

After inventory today, I need the Firing pin cocking lever + the RMG slide. I have plenty of pins.

PM me with your addr again.

Roger
 

·
Registered
Joined
·
2,930 Posts
Discussion Starter · #7 ·
The firing pin cocking lever and one of the RMG slides SPF to storage_man .
15 + 25 +6 = $46

Pm on it's way .
Thanks , Chris
 

·
Registered
Joined
·
2,930 Posts
Discussion Starter · #8 ·
Funds recieved from Storage Man , parts shipped and recieved.
Funds recieved from Louis , will be shipped asap.
Thanks all , Chris
 

·
Registered
Joined
·
2,930 Posts
Discussion Starter · #9 ·
Funds recieved from Karl T , should ship today .
Order for Louis was shipped and recieved .

Ad updated and bumped to the top .
Thanks all , Chris
 

·
Registered
Joined
·
2,930 Posts
Discussion Starter · #11 ·
Actually , I forgot :eek: .
Did look this morning and did find the parts .
I only have one of those "L" ish brackets stamped with a GW749377 ( best I can tell ) I'll ship you .

I also started another ad for the other stuff in the box so they won't confuse this thread .
Let me know if you want anything else before I ship the bracket.
Chris
 

·
Registered
Joined
·
2,930 Posts
Discussion Starter · #15 ·
Glassmountains , I have not recieved any funds or communications .
Did you get my PM from the 30th ?
Chris
 

·
Registered
Joined
·
1,127 Posts
Chris,
If you come across another RMG Slide.....I could really use one bad.
Thanks
TiredIron
 

·
Registered
Joined
·
2,930 Posts
Discussion Starter · #20 ·
All parts listed are here .
I had to remove the cosmoline type coating to take a look . It has no markings that I can see . It is also not new . There is some pitting under the coating and some wear on the top edges . Nothing to prevent use , but not new .
Also , by cocking lever do you mean cocking stud or the belt slide lever ?
Chris
 
1 - 20 of 25 Posts
Top