1919 A4 Forums banner
1 - 6 of 6 Posts

·
Registered
Joined
·
2,676 Posts
Some people don't realize you don't have to be a machinist to make this cut. You don't need a grinder either. I did the taper and cut the accelerator clearance with a file. All you need is a flat ******* (and I mean that in a nice way).
 

·
PhD in Over-Engineering
Joined
·
8,645 Posts
Flat *******? Wasn't that the character in one of the Austin Powers movies? :D
 

·
Premium Member
Joined
·
928 Posts
Door, if you don't taper it, the trigger disconnector will slam into it and probably not survive the encounter.
 

·
Registered
Joined
·
120 Posts
Flat Broke *******


You really need to do this to let the trigger bar lay flat on top of the barrel extension tang.:eek: Check it before you do it :confused: and then again after you do it.:rolleyes: Then you'll see the need ! TANKER
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top