Canvas Case for M1919A6
Join the discussion
Recommended Reading
-
Feed issue on conversion
Semi 1919a4 BuildingI’ve installed a 3006 barrel and booster, headspaced, Removed the left front 308 cartridge guide. When I insert linked rounds, live and dummy rounds, it will strip the first round and chamber it and the next cycle, it will eject the round but the gun will not pull the next round from the belt...- 22
- 441
-
Rear sight base designs
Semi 1919a4 BuildingAnyone know the origination of the rear sight base in the back. As far as I know, the one in front is standard GI. Thanks as always!- 4
- 108
-
Building 1917 vs. 1919a4
Semi 1919a4 BuildingAs usual, I have questions! I was noticing as I was looking at replacing the worn trunnion in my 1919a4, that I’ve accumulated a good many parts. Like with ARs, my mind started thinking...”wouldn’t have to go far to start another build”... Then I wondered, what is the story on the 1917 water...- 30
- 838
-
Banning milling machines
Semi 1919a4 BuildingNot sure if this has been posted here or not. Did a search and nothing popped up. Anyway was posted on one of the machining forums I visit. Link to the article below. Congress moves to ban milling machines that can make guns.- 44
- 2K
-
Hawk · updated
-
1919A4 Barrels
Semi 1919a4 BuildingMy 308 Izzy is telling me it would like to run some 30-06, so I remove the spacers in the feedway, change the booster orifice and pop in a 30-06 barrel is that it ? So the 06 barrels are a little more scarce than the 308 ones, is there any reason not to take a 308 barrel and run a 06 chamber...- 10
- 462
Join now to ask and comment!