1919 A4 Forums banner

Failure to feed on semi-1919

1K views 1 reply 2 participants last post by  30calmachinegunner 
#1 ·
Just got back from the range and my 1919 (.308) fails to feed reliably.It seems the cam that fits into the groove on the top of the bolt jumps out of the groove and leaves the feed pawl(?) jammed open.
This began to happen after about 20 rounds.Any ideas or suggestions to fix this problem?

Thanks
Hog Leg Jack
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top