Joined
·
5,337 Posts
These are NOT new barrels they are refurbished USED barrels. All are Saginaw, 2- D35233-14 and 3-D-35233-6.They have been cleaned and reparked. These barrels are "servicable" as described in TM-9-1005-212-25 paragraph 3-9. I do not have a barrel erosion gage, or a breech bore gage so I can't give absolute numbers. This TM can be downloaded or viewed on this site. I estimate that all have greater than 50% of life left in the bore. Because of the amount of exterior corrosion some of the barrels have a blotchy appearence. I do not remove any metal when cleaning I use only wire brushes and abrasives. All have good threads, and good locking notches.
1-"blaster" although it's better than usual $35+15 s&h
4- "servicable" $65+15 s&h each
Two of my previous customers have posted positive comments, one did not post. See the thread "Got .30'06 barrels?"
I reccommend contacting me directly by e-mail [email protected] last time there was some confusion about replies to pm's
Attached are before and after pictures so you can see what you are buying.
1-"blaster" although it's better than usual $35+15 s&h
4- "servicable" $65+15 s&h each
Two of my previous customers have posted positive comments, one did not post. See the thread "Got .30'06 barrels?"
I reccommend contacting me directly by e-mail [email protected] last time there was some confusion about replies to pm's
Attached are before and after pictures so you can see what you are buying.
