[chriskat]

When parkerizing semi builds do you disassemble the rear sight? I assume yes but I can't find any disassembly instructions anywhere.

If so is it fairly straight forward?

Jeff

 

[TARGSHOOT]

well some people do park with sight in place there is a 1/16 pin in the sight windage knob. use a small starter punch to start the pin out, most knobs are staked on both ends, then use a standard 1/16 punch to knock it out. remember when going back together use the 1/16 punch as a slave pin so the pin will go in easy for the most part, locktite or restake.... other than that is is straight forward