1919 A4 Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
330 Posts
Discussion Starter · #1 ·
Is there any difference in the right plate between M2 and M3 semi side plates and does anyone know where I can look up a dimensioned drawing of the M3 plate?
 

·
Premium Member
Joined
·
1,341 Posts
Im sure other more knowledgeable folks will chime in , the m3 plates have a cutout and two holes for the depressor

somewhere I have a comparison pic, but you can go to TomT site and click on the m2 and m3 plate pics and see the diff

http://www.karmametalproducts.com/KMP/KMP_50 Cal.htm

The m2 plate I received form Karma a few weeks ago has the cutout and the hole locations are spot drilled
 

·
Registered
Joined
·
1,665 Posts
Yep, same plate, just do you want the wiggly-bits mounted on the plate for high-speed running, or on the buffer housing for... Maintenance (?). The pros and cons are debatable, mostly it depends on what you want. M3 parts are "Cheaper", M2 "More Desirable", and nothing you need ever seems to cost less than $300 :p
 

·
Registered
Joined
·
330 Posts
Discussion Starter · #4 ·
I have an M2 in work if I can ever get it back . Have a M3 kit just no r plate , I figure I ca n cobble it together myself for free.
 
1 - 4 of 4 Posts
Top