[phillip]

Whats the current price for machining of the internals, And exactly what parts need to be sent off?

 

[Rory]

contact 30calmachinegunner on this site

i could be off a little but not much but i think that it is 100 without the trigger and sear or 200 with. (i might be a little off)

rory

 

[Rory]

oh barrel extension bolt and lock frame

r

ps here is brian's contact info

http://1919a4.com/viewarticle.php?articleid=16

 

[30calmachinegunner]

Just a little off R, it is $90 for just the machining or $200 for the machining, KMP trigger and sear, return spring, refinishing, both prices include return shipping.
I need the bolt, barrel extension, lock frame and acclerator, let me know if you have any questions, thanks Brian.

 

[Lextech]

I apologise for asking a question thats probly been answered here many times before, sorry FNG, but what is the actual semi conversion being done? I understand that Brians milling the parts thinner to fit inside with a wider RSP, that way no original parts will just drop in and convert the wepon back, but whats the semi conversion, are you adding a sear to catch the bolt everytime it returns?

 

[blkbd]

Other than machining the internals to fit the RSP he will cut the bolt for the new wider semi sear and widen the acclerator to clear the new sear along with a clearance cut on the back of the barrel ext. for clearance of the trigger. Go with KMP trigger and sear there a proven performer and that why Brian uses them. The KMP trigger is a spring loaded disconnecting type and the gun will still be a closed bolt design but only in semi auto. Also everyone here will tell you that Brian's work is top notch along with his customer service and very fast turn around.

 

[Rory]

and i forgot accelerator

seriously send em to brain. as all of those that have done theirs correctly, and any of those who have messed up but will not admit to it or really damn near anyone else. can you really imagine being able to do this all for under a hundred bucks on your own? i mean you might already have the tooling but think of the time involved and the added expense if you do by chance mess a piece up.


r

 

[L999here]

....yeah....!!!

What Rory said. Brian (30cal) has probably done more 1919 internals than any other person. He's done over (30) sets for me alone. There is nothing better than receiving your internals....completely reparked and shiney...and ready to just slide into the completed receiver.

 

[smee78]

+1 for Brian, 2 sets done for me.

 

[phillip]

OK, You want the bolt, barrel extension, lock frame, acclerator, And 90 bucks? Ive got the KMP Trigger/Sear already so you dont need that, Right?

 

[30calmachinegunner]

if you have it already I don't have to have it, sounds good.

 

[phillip]

Ill get them out to you next week. Thanks.