[Twisted]

Building a T-13 gun (Dolf's BMG vol 1 pg 340-41) Want to engrave exactly as illustrated. Who can do the work. Please E-mail shipping address and charges
Work to be done one a registered 100% KMP Rsp

 

[Rory]

http://www.orion-arms.com/new/

he's a member here too

 

[AaronHorrocks]

Top Notch quality, and good guy


Steve Sawyer
Tom Sawyer Mfg
Is now out of the business!

I am no longer in the firearms or engraving business.....

...I sold my engraving business to Ryan at Orion Arms.I appreciate your helpSincerely, Steve Sawyer formally Tom Sawyer Mfg

 

[30calmachinegunner]

I thought Ryan at Orion arms bought Tom Sawyers engraving business correct me if I am wrong on this.

I can recommend Orion arms also

http://www.1919a4.com/forums/member.php?u=2017

 

[kilroyjones]

I thought Ryan at Orion arms bought Tom Sawyers engraving business correct me if I am wrong on this.

I can recommend Orion arms also

Yeah, I believe you are right.

 

[J.Bal]

I would recommend Orion also.

 

[AaronHorrocks]

I updated my old post.

I guess I missed a lot in the year and a half I was relocated!

 

[Twisted]

Orion Arms

Can't get any mailing info from there website and I can't get them to return my direct E=mail either........... Business must be good.

 

[Rory]

on their site is says that business hours are evenings. so i'd guess you should give it a day or two

i do hate how they refuse to post prices though. that is just silly to me.

r

 

[brassmagnet]

Can't get any mailing info from there website and I can't get them to return my direct E=mail either........... Business must be good.

Info removed by request......

 

[Twisted]

Thanks Brass Faxed Orion waiting for their reply. Does anyone know if Orion Laser engraves or are they machine cut. Those having the work done is it deep?

 

[30calmachinegunner]

What I have seen is machine cut and plenty deep if your wanting to fill it in with a lacquer stick or something

 

[mojohona]

He is a member here and is hard to get ahold of. Tried to get him to do a cetme. No reply yet. I am in his neck of the woods and seen his work. It is very good.

 

[Orion Arms]

He is a member here and is hard to get ahold of. Tried to get him to do a cetme. No reply yet. I am in his neck of the woods and seen his work. It is very good.

mojo,
we have not had a cetme request in some time. there are few occasions where an email does not get through. please feel free to email us again and if you do not receive a response within a few days please pm us on this board.

 

[phillip]

Is this the right order?

1) Build
2)Park
3)Engrave

Or should you engrave before parking?

 

[30calmachinegunner]

engrave it first

 

[AaronHorrocks]

When building an AK should one engrave the receiver AFTER the sheet metal has been stamped?

 

[Orion Arms]

with all rsps you want to engrave before the build and park.
with an ak flat they will need to be bent first. also to cross state lines they will need a serial number on them.

 

[AaronHorrocks]

Thank you sir! I'll be looking for your business in a few months here.

 

[phillip]

So, Engrave, Build, Park. But wait, Two FFL fees at 25 bucks a pop, And two shipping and insurance charges at 15 each, Plus engraving at ????? WHEW! This belt fed thing gets expensive quick dont it?