[mustang1349]

I saw a m2hb parts kit on military gun parts web site was wondering if it would be worth the money to mess with

 

[autofire]

First off is it complete minus the side plate and what are they asking. Pending price always worth messing with in my opinion.

 

[panaceabeachbum]

Im guessing you're referring to the ones at military gun supply that are torch cut thru the trunnion?

http://militarygunsupply.com/index.php?main_page=product_info&products_id=1244

 

[Rory]

wow... looks like you will be paying 850$ for a back plate.

 

[autofire]

Those are to far gone, seen 2 kits at the creek 5 & 6k for them. These are complete less rsp

 

[mustang1349]

Thought they were way to far gone but it never hurts to ask.

 

[histeve4]

parts kit on gun broker

Thought they were way to far gone but it never hurts to ask.

there is one on gun broker now not a complete set but all new parts

 

[mustangman7]

there is one on gun broker now not a complete set but all new parts

Here is the link to the one histeve4 has on GB: http://www.gunbroker.com/Auction/ViewItem.aspx?Item=518550054

http://www.gunbroker.com/Auction/ViewItem.aspx?Item=518550657

http://www.gunbroker.com/Auction/ViewItem.aspx?Item=518551262

I have gotten more parts from him and they have been first rate stuff very fairly priced. I would buy this in a second if I was able too but all my money is tied up in my C5A1 Project.

Mike--Mustangman7

 

[L999here]

...remember...

Just for clarity,I've never seen a 'complete' M2HB kit (minus RSP and trigger/sear parts). Usually,you have to get a few springs,pins or minor bolt/bbl extension parts to complete the build. After a couple tries to get needed parts,I decided to order the spring and small parts kits from SARCO. I was thrilled to get every part needed to finish my build...plus some badly needed extras...and made it a practice to get these kits for every M2HB build after that. They even included the large flat spring used on the bottom of the WW2 buffer body...!!! I would encourage anyone who intends to build an M2HB,to order these valuable and hard to get parts in a kit from SARCO...rather than try to get them piece-meal.

 

[ajmdreammg42]

Just for clarity,I've never seen a 'complete' M2HB kit (minus RSP and trigger/sear parts). Usually,you have to get a few springs,pins or minor bolt/bbl extension parts to complete the build. After a couple tries to get needed parts,I decided to order the spring and small parts kits from SARCO. I was thrilled to get every part needed to finish my build...plus some badly needed extras...and made it a practice to get these kits for every M2HB build after that. They even included the large flat spring used on the bottom of the WW2 buffer body...!!! I would encourage anyone who intends to build an M2HB,to order these valuable and hard to get parts in a kit from SARCO...rather than try to get them piece-meal.

Len, are you talking about the $40 springs kits they had or on sale at 3 for $100 ? if so they are no longer offered and if they did I would get a bunch of them.

 

[L999here]

...been awhile..

Yep...been a couple,maybe 4 yrs. since I had an M2HB build. Have enough parts/pieces to do a couple more. Been collecting parts to keep the FA M2HB going...spares are always good to have....before you actually need 'em. Did not know the spring kits are no longer available.

 

[nirvana]

Im guessing you're referring to the ones at military gun supply that are torch cut thru the trunnion?

http://militarygunsupply.com/index.php?main_page=product_info&products_id=1244

Well...those are turds. Wow...

 

[histeve4]

spring kits

The spring kit are there if you ask, most of the time dave and his staff can put a couple of kit together for you. the only difference is you don't get the main drive rod just the inner and outer springs, still well worthy the money .While I do try to include all needed parts in parts set you will always need to get the support shims when building ,a screw or spring not that much more trouble.

 

[Viper5243]

I saw a m2hb parts kit on military gun parts web site was wondering if it would be worth the money to mess with

Thanks for the heads up. It's worth it if you are building a postie and need both side plates. They have two different kits but im not sure the difference between them.

$675
http://militarygunsupply.com/index.php?main_page=product_info&cPath=20_30&products_id=1242

$850
http://militarygunsupply.com/index.php?main_page=product_info&cPath=13&products_id=1244