1919 A4 Forums banner
1 - 10 of 10 Posts

·
Registered
Joined
·
1,506 Posts
Discussion Starter · #1 · (Edited)
ring mount trolley carriage, ADDED NICE DRAWING !!

just found and added a nice parts vieuw for the trolley ass.
check my last post in this topic.


hy, does anyone have a good and decent parts list ore website that wil show detailed parts that are used on the carriages for the ring mount
to
i believe for mount model M49 and/ore m36 m50 m49 m32 and also m37A2

i need to identify the small parts to go into ring mount carriage
ane leads and help would be very appriciated
only pictures i found were kind of blurry, and not very sharp

thanks !! john.
 

·
Registered
Joined
·
1,506 Posts
Discussion Starter · #4 · (Edited)
pictures added

Rick, for now i have found 4 differant parts
thati believe belong to the trolley carriage
iff you ore any other members know were these parts belong to, i would be happy to hear so
mabay even a drawing that shows were these are put,
i also would like to know iff the brass pintle block, belongs into the normal carriage, ore another cradle
also the large locking pin in the second picture, i cant place this one also
picture 3 shows an elbow type of steel pun, with a portion flattend, dont know were this belong either
picture 4 shows steel half moon shaped plates witch i believe are for the trolley carriage, i pictured them showing the front and back side
any leads........ anyone....
thanks, john.


Product Pipe Handle Metal
 

·
Registered
Joined
·
2,280 Posts
I know the threaded handle is part of the locking-down mechanism for the long-tail early gun cradle. Maybe the pintle block too. This cradle fit on skate rails in halftracks. Dont appear to be part of the trolly for the m49 ring. J
 

·
Registered
Joined
·
2,280 Posts
Does the pintle block have two cross holes about 3/8' diameter? If so, definitely for the long-tail .50 cradle. J
 

·
Registered
Joined
·
129 Posts
The G67 code shown on the 2 tags is for a White M3a1 Scout car. Not the M3 halftrack.
 

·
Registered
Joined
·
2,280 Posts
Only reason I mentioned halftrack is all the pics Ive seen from Africa have this cradle in them. And the skate rail is very similar.
 

·
Registered
Joined
·
1,506 Posts
Discussion Starter · #10 ·
extra info found .. nice drawing

this morning i finnaly managed to get in a nice parts display drawing for the trolley itself
i now at last can identify surtain parts
the half moon shaped steel plates are on this drawing also, so i was right after all that these were also trolley parts
for all who have an interest here,s the drawing,
always handy to copy, and keep it on file
sorry for the cirkeled areas, those were parts i identified
also the pintle locking latch is on here but i did not marked that one, A173767
regards john

. Text Drawing Sketch Recreation Line art


Only reason I mentioned halftrack is all the pics Ive seen from Africa have this cradle in them. And the skate rail is very similar.
 
1 - 10 of 10 Posts
Top