T
twistedpuppy
·Guest
Joined
·
0 Posts
where can i get the proper rivet setting tools and what sizes will i need? about to assemble several recievers.
rivet setting tools
1 - 3 of 3 Posts
T
twistedpuppy
·Guest
Joined
·
0 Posts
please delete this thread. it was a double post
Joined
·
2,572 Posts
But I have the Rivet setting tools, as well as bits and countersinks
http://www.1919a4.com/forums/showthread.php?p=5106#post5106
MSG
http://www.1919a4.com/forums/showthread.php?p=5106#post5106
MSG
1 - 3 of 3 Posts
Join the discussion
Recommended Reading
-
Feed issue on conversion
Semi 1919a4 BuildingI’ve installed a 3006 barrel and booster, headspaced, Removed the left front 308 cartridge guide. When I insert linked rounds, live and dummy rounds, it will strip the first round and chamber it and the next cycle, it will eject the round but the gun will not pull the next round from the belt...- 14
- 191
-
1919A4 Barrels
Semi 1919a4 BuildingMy 308 Izzy is telling me it would like to run some 30-06, so I remove the spacers in the feedway, change the booster orifice and pop in a 30-06 barrel is that it ? So the 06 barrels are a little more scarce than the 308 ones, is there any reason not to take a 308 barrel and run a 06 chamber...- 10
- 261
-
Building 1917 vs. 1919a4
Semi 1919a4 BuildingAs usual, I have questions! I was noticing as I was looking at replacing the worn trunnion in my 1919a4, that I’ve accumulated a good many parts. Like with ARs, my mind started thinking...”wouldn’t have to go far to start another build”... Then I wondered, what is the story on the 1917 water...- 28
- 645
-
Banning milling machines
Semi 1919a4 BuildingNot sure if this has been posted here or not. Did a search and nothing popped up. Anyway was posted on one of the machining forums I visit. Link to the article below. Congress moves to ban milling machines that can make guns.- 42
- 1K
-
Hawk · updated
-
Odd, to me, headspace for 30-06
Semi 1919a4 BuildingI just replaced the barrel with a 30-06 barrel. When I headspaced it, at 1 click from fully screwed in to extension, it was not in lock up. At 2 clicks, it was. I was expecting around 11. I went 2 clicks past lock up for a total of 4 for 30-06. Does this sound right? I’ve headspaced twice with...- 4
- 147
Join now to ask and comment!