SG-43 Guryanov receiver drawing / blueprint
1 - 18 of 18 Posts
Joined
·
1,845 Posts
this might even help you better :
https://www.gunbroker.com/item/786232223
and:
https://www.gunbroker.com/item/786232224
https://www.gunbroker.com/item/786232223
and:
https://www.gunbroker.com/item/786232224
Joined
·
62 Posts
Joined
·
298 Posts
Those might end with a quick trip to Club Fed though, seeing as how they are coming from Europe and haven't been 'destroyed'. Although I will admit I have been seeing alot more of this type of stuff popping up recently.
Joined
·
298 Posts
Saw cutting was OK many moons ago. Now the regs specifically require a torch cut.
https://www.atf.gov/firearms/how-properly-destroy-firearms
Not saying you couldn't get it past customs but I don't know that I would want to take the chance. Now that being said I think buying/owning one half of the receiver would be still be copacetic but both halves would wander dangerously close to constructive possession.
https://www.atf.gov/firearms/how-properly-destroy-firearms
Not saying you couldn't get it past customs but I don't know that I would want to take the chance. Now that being said I think buying/owning one half of the receiver would be still be copacetic but both halves would wander dangerously close to constructive possession.
Joined
·
3,716 Posts
I had a topic on this a few weeks ago. The SG43 build has faded out of popularity, as has its build plans. Weaponeer.net has a small build section but they are light on critical dimensions. You can eyeball most of the build using the top cover as a guide, but you ABSOLUTELY MUST get the middle section correct for proper headspacing. Im not aware of any real blueprints or receiver drawings that are readily available. Id be happy to take pics on mine and send measurements, but be aware Im a garage builder and my results are far less accurate than a guy with a full machine shop.
Joined
·
1,585 Posts
Greg Clark was a pro builder of this weapon. I suggest you buy his how to build CD
http://www.gunbuilds.com/cd.html
http://www.gunbuilds.com/cd.html
Joined
·
3,716 Posts
60 bucks seems a little outrageous. Maybe if he showed a tidbit of what he was providing, maybe a few sample pages Id be more willing to spend the money. Regardless, If his CD is as informative as stated, It would be a wise investment.
Joined
·
2,733 Posts
What dimensions are you trying to find? I dont have much info on these but it might help to post what you are looking for.
BTW I have been trying to find a rear sight. Does anyone know where to get one?
BTW I have been trying to find a rear sight. Does anyone know where to get one?
Joined
·
1,585 Posts
Joined
·
62 Posts
The center to center distance of the mounting holes.....
My friend is working on a KGKT and curious if the KGKT and the SG-43 hole diameter and spacing is the same. If so the KGKT mount can be used for weld positioning.
Joined
·
62 Posts
Agree with the other persons comment on $60 a bit steep without a clue whats in it.
Joined
·
3,129 Posts
Did you build it ?......I have a Grag Clark build that I am going to putting up for sale soon , that runs like yours...Good vid.
Joined
·
77 Posts
Does anybody have contact info for Greg. I have one of his first original 20 guns. It's needs a repair to the FCG, action bar on the side.
I've tried the old email I had for him but no response
Thanks Dwayne
I've tried the old email I had for him but no response
Thanks Dwayne
Joined
·
2,916 Posts
Not sure if he is still building guns, bought some stuff from him a year or so ago and He is writing novels now. Let me do some digging I might still have his email I know I have one of his books it might have contact info.
Greg
Joined
·
2,916 Posts
Ok the email I have is probably the same one you have. His book has a facebook page contact. I will PM you what I have.
Greg
1 - 18 of 18 Posts
