What happened was the stupidity monster joined forces with my cold medicine.....when I went to drill out the safety hole my drill bit wasnt sharp enough and pushed the inner trigger box inward instead of drilling it. The metal got all pushed over. I tried to straighten it but it was already butchered. The resulting hole was all oblong. I squeezed it all together and welded up the hole and attempted to drill a second time but the hole is still crooked. The safety is now canted about 7 degrees and is very hard to manipilate. Operator error and it looks like crap. Im thinking about putting plates over the holes and running either a straight blocking bar or no safety at all. Argh. Hoping the forward pistol grip takes away from the big nasty hole......
