Welcome to the new Misc Firearms forum!
1 - 7 of 7 Posts
Joined
·
64 Posts
I hope yall know that you SUCK!!
1 - 7 of 7 Posts
Join the discussion
Recommended Reading
-
Reluctant Lewis revisited. Help, help!!!
Misc FirearmsBack out with the Lewis.....fizzled again. Even with all the gas leaks fixed, it did the same thing. 4-6 rnds and stop with the cocking handle 1 1/2" short of the sear. And, kinda stuck there, wouldnt move either way without some level of force. I had to use the end of a bigger hammer handle...- 8
- 380
-
heckinohio · updated
-
Digger color
Misc FirearmsI’ve been slowly working on my Colt Commercial 303 Digger and upon disassembly I’ve found multiple traces of green enamel paint on it. I’ve found good circumstantial evidence that this gun was used by the Canadians and possibly the MMGB units. Anyone seen Colt diggers or even diggers period...- 16
- 290
-
Grease Gunner · updated
-
Chauchat Failure to feed issues?
Misc FirearmsHey everyone, now that the shooting ranges are starting to open back up, I was wondering if anyone has any suggestions to help me figure out my feeding issues on my Chauchat. I have the gun out shooting and its doing about 3 round bursts and then jamming the bullet tip into the top of the...- 20
- 718
-
IMBLITZVT · updated
-
1915 Omnibus tripod restoration
Misc FirearmsWhat to do....... The elevation mechanism is brass The bending knees are brass The leveling foot adjustment is brass My gut says polish all the brass and hot blue all the steel. My brain says Laser match the original blue/grey paint and make it look correct. Well my friends and peers, What say...- 27
- 1K
-
Mike Duke · updated
-
Who can reproduce a recoil spring for a 1914 Hotchkiss
Misc FirearmsThis is the spring in question. Pretty large coil type compression spring. I had one place say “hey no problem but you need to order at least 50.”- 7
- 195
-
Mike Duke · updated
Join now to ask and comment!