where can i get semi auto sten parts
1 - 15 of 15 Posts
http://shoot1919a4.com/forum/viewtopic.php?t=2781
http://shoot1919a4.com/forum/viewtopic.php?t=2782
These are two freat tutorials that dutigaf posted.
The semi conversion kits that he used are available at http://www.semiautosten.com/
http://shoot1919a4.com/forum/viewtopic.php?t=2782
These are two freat tutorials that dutigaf posted.
The semi conversion kits that he used are available at http://www.semiautosten.com/
Joined
·
299 Posts
i just found this one to http://www.indianapolisordnance.com/sten-mk3.htm i'm going to call them on monday
Joined
·
1,259 Posts
Neither link works......
There's been something wrong with the site for the past couple of days.Neither link works......
Joined
·
2,141 Posts
ive got the same build threas here on this site..
thanks for the plug COPE.
im very interested in any conversions... will check out the other link here.
Semi Auto Stens is about to get back up and running again, Yooper AL p'd me the other day and told me his helath is slowly returning and he is trying to get back into the swing of things.
do love my stens, and when you get one right, they are a ton of fun.
but sometimes they do take a little "fine tuning". LMAO thats the fun of it.
thanks for the plug COPE.
im very interested in any conversions... will check out the other link here.
Semi Auto Stens is about to get back up and running again, Yooper AL p'd me the other day and told me his helath is slowly returning and he is trying to get back into the swing of things.
do love my stens, and when you get one right, they are a ton of fun.
but sometimes they do take a little "fine tuning". LMAO thats the fun of it.
Joined
·
98 Posts
Once you're done, please post up how well it works. I've heard of numerous issues with the SAS3 kit, but haven't found anyone with the IO kit.
Thanks
What kit? All I see are receiver blanks for sale???
STENSAK Semi automatic conversion kit.
Works with the receivers above and comes with
everything you need to build an excellent closed bolt rifle. Beautifully machined to outlast and outperform!!!
This kit?
Joined
·
158 Posts
Hey "C"
He offeres the blank tubes, conversion "Kit"'s, legal barrels, and a block that allows the full auto selector to act as a safety..
The kit has the new bolt, firing pin, springs (3), rivits, hammer and misc parts.. The bolt looks real nice.. Nice custom work..
The new 16" barrel comes with the back barrel bushing, and even is rifled.
Mine is done and ready for welding.. I'm a farm "Stick" welder from way back but a stick welder would blow the metal apart.. I was going to buy a cheap mig fluxcore welder, but the opinion of many board members is that splatter is real bad.. I want to do justice to Jasons work so I'm trying to find a used mig welder with gas.. (75% Argon, 25% CO2)..
Really wanting to get this welded and out for a test, but finding a welder is a problem. I think I can get a new one for about 3 bills, but was trying to keep the cost down..
I'll let you know when I figure something out..
Tim
Joined
·
2,141 Posts
bub,
dont let the welding stop you.... im a puddle jumper at best....
if you got a mig you can do this with no problem.
as to the splatter, if you got a argon set up you wont hardly any splatter at all and that will clean right up.
weld it!! clean it up and if it needs it take your dremel and polish up the welds.
he has a very nic elooking kit and im looking forward to you doing a demo run!! may have to get one of these after hearing your results.
dont let the welding stop you.... im a puddle jumper at best....
if you got a mig you can do this with no problem.
as to the splatter, if you got a argon set up you wont hardly any splatter at all and that will clean right up.
weld it!! clean it up and if it needs it take your dremel and polish up the welds.
he has a very nic elooking kit and im looking forward to you doing a demo run!! may have to get one of these after hearing your results.
1 - 15 of 15 Posts
