WTB BOLT 7.62 Semi-Auto 1919

GBYENKO · 2023-05-25T10:15:37-0400

TerryChip said:
Wanting to buy a bolt for a 7.62 Browning 1919. It needs to be cut to semi-auto.
[email protected] or text 310-753-5288

Your best bet is to buy a uncut bolt and then have it cut to fit your sear and side plate.

Lucky#13 · 2023-05-25T20:40:57-0400

If you can identify the denial island design, I can provide a bolt cut to that spec, slotted for the KMP sear.

TerryChip · 2023-05-25T23:23:15-0400

Hi and thanks for your reply. What I have is a KMP RSP. My sear is marked with a "K". I am looking for a 7.62 bolt in semi-auto. I'm new at this so pardon me if I am not providing enough info. Terry 310-753-5288

TerryChip · 2023-05-25T23:38:20-0400

GBYENKO said:
Your best bet is to buy a uncut bolt and then have it cut to fit your sear and side plate.

Thanks, This has been an intersting and challenging project for me. Terry

GBYENKO · 2023-05-25T23:41:47-0400

TerryChip said:
Thanks, This has been an intersting and challenging project for me. Terry

No problem, not all sears and side plates are the same and it's a good idea to match them up. Lucky 13 can definitely get you fixed up.

TerryChip · 2023-05-25T23:44:55-0400

Ok, Thanks. Terry

Lucky#13 · 2023-05-25T23:55:43-0400

KMP uses what I generally refer to as the common or standard denial island on their plates, and I use their sears as well. So, I know what you need and can mill one to suit.

Stock, full auto bolts are now $149 from the only vendor I know of that still has any, and that is a stripped bolt of course. I'd be at $195 + $10 shipping for one cut for the KMP sear and denial island. Again, that is a stripped bolt ready for your semi. If you need the remaining parts, I can see about quoting that as well. No worries either way, but glad to help out if you are good at that price. Freshly parkerized after machining as well, just fyi.

TerryChip · 2023-05-26T09:12:19-0400

Ok, I would like a complete bolt Please. Im ready to proceed. Also looking for A4 30-06 barrel and an A6 barrel. Thanks, Terry [email protected] 310-753-5288

TerryChip · 2023-05-26T12:46:38-0400

Lucky#13 said:
KMP uses what I generally refer to as the common or standard denial island on their plates, and I use their sears as well. So, I know what you need and can mill one to suit.

Stock, full auto bolts are now $149 from the only vendor I know of that still has any, and that is a stripped bolt of course. I'd be at $195 + $10 shipping for one cut for the KMP sear and denial island. Again, that is a stripped bolt ready for your semi. If you need the remaining parts, I can see about quoting that as well. No worries either way, but glad to help out if you are good at that price. Freshly parkerized after machining as well, just fyi.

Ok, I would like a complete bolt Please. Im ready to proceed. Also looking for A4 30-06 barrel and an A6 barrel. Thanks, Terry [email protected] 310-753-5288

Lucky#13 · 2023-05-26T13:41:34-0400

When you say complete bolt, I am going to assume you mean with the extractor included, as well as the firing pin, sear spring, cocking lever and pin. Now I do not have extra semi sears, so you will need to just get the sear and trigger set direct from KMP. As it is, if I supply the extractor it will be the new KMP one. Extractors cost as much as the bolts, $145 now, just so you know. All other parts will be original surplus. I'll work up a total for you momentarily.

TerryChip · 2023-05-26T14:22:39-0400

Lucky#13 said:
When you say complete bolt, I am going to assume you mean with the extractor included, as well as the firing pin, sear spring, cocking lever and pin. Now I do not have extra semi sears, so you will need to just get the sear and trigger set direct from KMP. As it is, if I supply the extractor it will be the new KMP one. Extractors cost as much as the bolts, $145 now, just so you know. All other parts will be original surplus. I'll work up a total for you momentarily.

I would like 1 (one) stripped .7.62 bolt and 1 (one) stripped .30 bolt. Both bolts cut for the KMP Island denial. Sorry if I have been vague on this. Your assistance is greatly appreciated. Just let me know how you would like to be paid. I can do check, money order, patpal ff, venmo, etc. Thanks, Terry

Lucky#13 · 2023-05-26T14:35:43-0400

TerryChip said:
I would like 1 (one) stripped .7.62 bolt and 1 (one) stripped .30 bolt. Both bolts cut for the KMP Island denial. Sorry if I have been vague on this. Your assistance is greatly appreciated. Just let me know how you would like to be paid. I can do check, money order, patpal ff, venmo, etc. Thanks, Terry

I am going to send you a PM to continue the discussion. We can work out the details there.