[spareparts]

The u-shaped thingy that is riveted into the shroud opposite the barrel gate. I have BRP shroud stampings and need this part to finish. Maybe someone has an ate-up shroud this part could be harvested from?

If this looks familiar, I've posted it on a couple other forums as well....

 

[BobNPrc]

Are you referring to the trunnion? It is U shaped and goes around the shroud (The "leg" with the squared corner comes out leaving a "U-shaped" part).

Looks like this: http://www.robertrtg.com/store/pc/MG3-TRUNION-COMPLETE-145p2624.htm

 

[spareparts]

No sir, this is the barrel stop, located inside the shroud. It, and the barrel gate, hold the barrel in place in the closed position.

 

[RHW1225]

RTG has them in stock

Don't know if you still need this but, RTG has the MG3 barrel stop listed for $29.95

http://www.robertrtg.com/store/pc/MG3-DEMILLED-BARREL-STOP-MG42-M53-17p3654.htm

 

[bmg17a1]

Don't know if you still need this but, RTG has the MG3 barrel stop listed for $29.95

http://www.robertrtg.com/store/pc/MG3-DEMILLED-BARREL-STOP-MG42-M53-17p3654.htm

Good to know. Thanks. just got a 42 kit into the shop for semi build that is missing the stop....