[cantrell]

Just need the pin the secured the gun to the extension
Tried repairing/replacing the feather and royally screwed up the original 🤬

 

[cantrell]

Might be ok now. Problem was that 1) I have (had) a p*ss poor vise which allowed my pin to keep slipping as I was attempting to remove the old feather. 2) that feather wasn’t going anywhere anytime soon which resulted in having to drill it out.
at this point I am good - just need to create the pin and fit it to the AA cradle mount

 

[cantrell]

Longer than expected project, but done
Dicropan T-4 touch up hides the brightness from filing

 

[Kirby]

What is the length of this pin? I may have one if you need a spare.

 

[cantrell]

Many thanks Kirby. I’ll measure it later. Should be ok for now but a spare may be a good idea.

 

[Kirby]

Many thanks Kirby. I’ll measure it later. Should be ok for now but a spare may be a good idea.

Take your time, Tuesday would be the earliest I could shift through the parts. I know I have one odd pin that I suspect is Turkish.