1919 A4 Forums banner
1 - 10 of 10 Posts

·
Registered
Joined
·
3,142 Posts
Discussion Starter · #1 · (Edited)
More great and wonderfully priced items from the salt mine. If you buy these parts from me, I can buy more stuff from you guys! I will of course combine for reduced shipping, I do not charge for shipping and handling nor do I make money on the shipping.

Will consider trades/plus or minus cash for stuff I am looking for: Original clamp for 1928 Colt belt loader, original used box for M1918 belt loader box, WWI Vickers parts and accessories, original M1917 spare parts box plus contents and accessories, M1917A1 or M1918 tripod, Finnish Maxim accessories, M1928 Colt WC Panoramic Zeiss Jena sight.

A. WWII era British Vickers leather tool and parts box used to hold spare parts, tools, and parts wallet and is carried by the gunner�s assistant (number 2). Marked .303 Vickers Gun made by J. Oakman and dated 1940. Leather and metal reinforcement strips and rivets in good condition a nice item in good usable condition. Does NOT come with carrying strap, I would like $30 for this nice WWII era parts and tool box. SOLD to L999here - PAID and SHIPPED




B. Reproduction leather carrying handle for the Vickers Battalion Parts and Spares Box.

Here is a rare chance to buy a very nicely made leather reproduction carrying handle for either the British or Australian Vickers Battalion Parts and Spares Box. Perfect for replacing a worn, damaged, or missing carrying handle at a very fair price. Near impossible to find and expensive to have custom made assuming you can even find someone to do it. The leather carrying handle will be identical to the one shown in the picture. Please note, the camera flash makes it appear lighter than it actually is. I have one left $100 plus actual insure shipping.
Bag Handbag Fashion accessory Leather Kelly bag


C. Item #1 - Original Vickers extractor assembly (extractor, gib, gib spring, and rear cover), WWII type firing pin #2, and a safety spring. All in good useable condition, extractor perfect for modifying for 7.62x54R ammunition by milling the cartridge rim slot. I would like $35 for it plus $6.80 insured shipping. SOLD to PKW VI Tiger1 - PAID and SHIPPED




D. Item #2 - Original Vickers extractor assembly (extractor, gib, gib spring, and rear cover), WWII type firing pin #2, and a safety spring. All in good useable condition, extractor perfect for modifying for 7.62x54R ammunition by milling the cartridge rim slot. I would like $35 for it plus $6.80 insured shipping. SOLD to Tom S - PAID and SHIPPED




E. Item #3 - Original Vickers extractor assembly (extractor, gib, gib spring, and rear cover), WWII type firing pin #2, and a safety spring. All in good useable condition, extractor perfect for modifying for 7.62x54R ammunition by milling the cartridge rim slot. I would like $35 for it plus $6.80 insured shipping.SOLD to CaptMax - PAID and SHIPPED




F. Item #4 � Two (2) Original Vickers WWI MKI firing pins. Both in good useable condition, I would like $80 for the pair plus $6.80 insured shipping. SOLD to Tom S - PAID and SHIPPED
Sewing machine feet Sewing machine Household appliance accessory


G. WWII Era Finnish Maxim Parts. Hard to find WWII vintage Finnish Army Maxim (09/21 and 32/33) rear tripod traverse mechanism in good working order $400 plus actual insured shipping.

Auto part


H. Set of three (pairs) of NOS WWI Era Vickers Aircraft Machine Gun Electric heaters. Hard to find WWI vintage heaters that attached to each side of the Vickers machine gun side plates and were used to keep the gun warm at altitude. There are two heaters per box, and you are getting three sets a very rare accessory in original card board boxes. Boxes in fair/good condition, heaters have small patches of surface rust from almost 100 years in storage. $50.00 including insured shipping. SOLD to CaptMax - PAID and SHIPPED
Wood


I. Israeli M1919A6 kit. Contains bipod, stock w/ clamp, carrying handle, and flash suppressor to convert a M1919A4 BMG into Israeli M1919A6 configuration. Set is in very good to excellent condition. $395 including insured shipping.



J. Nice set of Russian Uniform items. Grouping of Russian items to include NOS Russian Navy Belt with two brass buckles, three army shoulder boards (two NOS, one used), a bunch of uniform buttons and two medals. $25 plus $6.80 insured shipping. SOLD to CaptMax - PAID and SHIPPED

Auto part


K. Very nice condition WWII Russian Maxim MG bottom plate. Nice plate in very good/excellent condition that is surplus to my current needs. Marked with a �T� (Tulva?) $90 plus actual shipping.

Wood Wood Bumper Automotive exterior Hardwood Floor

L. One Lot of NOS Bren parts in original boxes. Nice grouping of eleven (11) barrel regulators, two (2) barrel nuts, and ten (10) magazine platforms. All parts are NOS and in perfect condition. $100 shipped won't ever find all of these at that price!. SOLD to booger hooker - PAID and SHIPPED
Wood Box


Please ask any questions before you say you will take it. First �I will take it�, followed up with a PM gets it. All items will be shipped by insured priority mail at actual cost, happy to combine items.
 

·
Registered
Joined
·
4,955 Posts
I would like to buy items "E", "H", & "J".
Please let me know the total with shipping redroth.
Thank-you, CaptMax
 

·
Registered
Joined
·
3,142 Posts
Discussion Starter · #4 ·
One set of Vickers Lock parts, three sets of Vickers MG aircraft heaters, and misc Russian army stuff ("E", "H", & "J".) SPF to CaptMax.

NOS Bren parts lot ("L") SPF to booger hooker.
 

·
Registered
Joined
·
283 Posts
I received all NOS Bren parts on Friday and they were securely packaged in the box. Luckily I don't need any of these parts at this time and can leave them in their original military packaging to admire. ;)
 

·
Registered
Joined
·
1,192 Posts
I'll take item #1 please.
 

·
Registered
Joined
·
1,192 Posts
Check your pm's
 

·
Registered
Joined
·
10 Posts
I Would like to purchase item #2

I Would like to purchase item #2 Original Vickers extractor assembly (extractor, gib, gib spring, and rear cover), WWII type firing pin #2, and a safety spring ($35.00 + $6.80 Shipping)
Please email me at tsprehe (@) frontiernet.net
 
1 - 10 of 10 Posts
Top