1919 A4 Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
WTS: S&W Revolver & Colt 1911 Parts - Factory,Vintage & Quality Aftermarket

Below is a partial list from my parts cache that I have reluctantly decided to sell as part of my workshop clean-up.

Normal routine applies, first "I'll take it" w/ PM follow up. Payment via money order preferred, personal check considered if bank is local to me. Shipping not included. USPS preferred shipping. Ask questions if not clear on item or need pics; contact J. at [email protected].

Parts are new unless noted.

S&W Revolver Parts

1. New Adjustable Square Leaf Rear Sights (minor storage wear, if any)

J-Frame - Qty. 1 .086" Target $35
K-Frame - Qty. 4 .146" Blades (3 Target & 1 White Outline ) $40 ea. (elevation screws $3/sight leaf screws $2)
N-Frame - Qty. 4 .146" Blades (1 Target & 2 White Outline) $40 ea. (1 Target 50's - 60's vintage wide serrated style) $50

(elevation screws $3/sight leaf screws $2)

2. Have a supply of new & used sight blades from .086" to .146", narrow & wide, target & white outline styles. Used blades - $3

ea. / New blades - $5 ea. Inquire

3. S&W Aluminum Grooved Handle Sight Adjustment Screwdrivers $20 ea.

4. K-L Frame - Qty. 1 Millet Series 100 Adjustable Sight .312" Serrated Target Blade $35
Millet Series 100 Sight Adjustment Tool $8/$5 w/ sight

5. Millet Series 100 Rear Sight Blades for Millet Rear Sights

Qty. 1 .312" Serrated Target $10
Qty. 1 .312" White Outline $10
Qty. 1 .312" Two Dot $10
Qty. 1 .360" Serrated Target $10

Limited supply of Millet Sight Internal Parts, Inquire

6. S&W Hammers (hammers complete unless noted, hammers late 60's-early 80's vintage unless noted)

J-Frame
Qty. 4 Forged Case Color Service Hammers (light finish wear, from like new guns) $20 ea.
Qty. 2 (desc. above, spurs broken; make bobbed hammer for carry gun) $15 ea.


K-Frame
Pre-1957 Rimfire
Qty. 1 Forged Case Color .375" Target Hammer (stripped, light finish wear) $35
Qty. 2 Forged Case Color .375" Target Hammer (stripped) $45 ea.

Post-1957 Rinfire
Qty. 1 Forged Case Color .500" Target Hammer (poss. used, hard to tell / very dark case color)$45
Qty. 3 Forged Case Color .500" Target Hammer (1 med. case color, 2 lighter case color) $50 ea.

Pre-1957 Centerfire
Qty. 1 Forged Case Color Service Hammer $35

Post-1957 Centerfire
Qty. 2 Forged Case Color Service Hammers $25 ea.
Qty. 1 Forged Case Color Service Hammer (light finish wear, from like new guns) $20 ea.
Qty. 1 (desc. above, spur broken; make bobbed hammer for carry gun) $15
Qty. 1 (desc. above spur removed; nicely completed bobbed hammer for carry gun) $15
Qty. 1 Forged Case Color .375" Target Hammer $35

L-Frame
Qty. 2 Forged S.S. Service Hammers $30 ea.
Qty. 4 Forged S.S. .375" Target Hammers $35 ea.
Qty. 1 Forged S.S. .375" Target Hammer (stripped, w/ nose pin) $20

N-Frame
Qty. 2 Forged Case Color .400" Target Hammers $50 ea.
Qty. 1 Forged Case Color .400" Target Hammers (poss. used, hard to tell / very dark case color) $45 ea.
Qty. 2 Forged Case Color .400" Target Hammers (stripped) 1 fully stripped $25 1 with hammer nose $35

7. S&W Triggers

J-Frame
Qty.1 Forged Case Color .400" Target Trigger (Stripped) $35

K-L-N Frame
Pre-1957
Qty. 1 Forged Phosphate Service Trigger (WWII Victory style, w/ spring & torsion hand)) $30
Qty. 1 Forged Case Color Service Trigger (poss. used or minor storage wear, complete) $30

Post-1957
Many New & Used Case Color Service Triggers, Complete and Stripped. Inquire

Qty. 1 Forged S.S. .500" Target Trigger (complete w/ cylinder hand) $50

8. Trigger Shoes

Qty. 1 S&W Forged Blue .500" Serrated Trigger Shoe #A1 (fits pre & post 1957 K-L-N Service Triggers) $20
Qty. 1 Flaig ACE Forged Blue .500" Serrated Trigger Shoe #14 (fits variety of pre & post 1957 J-Frame triggers) $20

9. S&W J-Frame Pre-1966 3rd Style Flat Cylinder Release Latch
Qty. 6 $15 ea.

10. S&W L-Frame Parts

Qty. 1 Mdl. 686 S.S. 4 1/8" Barrel FL RR Front Sight (light storage wear) $50
Qty. 1 Mdl. 686 S.S. Fluted Cylinder Complete Assembly w/ Crane (used, from new gun) $50

11. Pachmayr Synthetic Grip Adapters

Qty. 1 Model 5M (K-N Frame, storage wear) $10
Qty. 1 Model 5S (N Frame, 1/4" longer & 1/8" wider than 5M) $15

12. Jay Scott Grips Qty. 1 #19A Black Pearl (J-Frame square butt) $20

13. S&W Cleaning Kits

Qty. 2 K-Frame Cleaning Kits (bagged with rod, brush, mop) $10 ea.


COLT 1911 Parts

#1. Colt Triggers

Early Government Triggers
Qty. 1 1927 Type Milled Checkered Colt Black Blue Finish (used, very light finish wear) $60
Qty. 1 Early 1940's Type Milled Serrated Dull Blue Finish (used, very light finish wear) $60
Qty. 1 WWII/1944-45 Stamped Checkered Colt WWII Parkerize Finish $40

70 Series & Pre-70 Series Government/Commander Triggers
Qty. 4 1960's Early Style Blue Finish (used, very light finish wear) $30 ea.
Qty. 8 70 Series Blue (used, very light finish wear) $25 ea.
Qty. 3 70 Series Type 2 Variant 3 Satin Nickle (used, very light finish wear) $25 ea.
Qty. 1 70 Series Type 2 Variant 3 Polish Nickle (used, very light finish wear) $25 ea.
Qty. 1 70 Series Type 2 Variant 3 ColtGuard (used, very light finish wear) $25 ea.
Qty. 3 70 Series Type 2 Variant 3 S.S. (used, very light finish wear) $25 ea.

70 Series Gold Cup Trigger
Qty. 1 70 Series Wide Adjustable Blue Finish $75 ea.

70 Series & Pre 70 Series Government/Commander Triggers Modified
Qty. 1 1960's Type 2 Variant 3 Early Style Hard Chrome Finish (looks new) $25
Qty. 1 1960's Type 2 Variant 3 Early Style Blue Finish Made Adjustable for Overtravel (used, very light finish wear) $20
Qty. 2 70 Series Type 2 Variant 3 Blue Finish Made Adjustable for Overtravel (used, very light finish wear) $20 ea.
Qty. 2 70 Series Type 2 Variant 3 Satin Nickle Finish Made Adjustable for Overtravel (used, very light finish wear) $20 ea.

#2. Colt Hammers

Early Government Hammers
Qty. 1 1942-43 Remington Rand (used, very little finish wear) $40
Qty. 1 1943 Ithaca $25
Qty. 2 1943-1945 Remington Rand (used, normal finish wear) $25 ea.
Qty. 2 1944 Colt $40 ea.

#3. Colt Grip Safety

Early Government Grip Safety's
Qty. 1 Post WWI 1918-1919 Colt (appears new) $40
Qty. 1 1941-1945 Springfield (used, light finish wear) $25
Qty. 1 1944 Colt $30
Qty. 1 1945 Remington Rand (used, light finish wear) $25
Qty. 1 Post WWII USGI Colt $20

70 Series & Pre-70 Series
Qty. 4 Long Tang Govt. Blue $10 ea.
Qty. 1 Long Tang Govt. S.S. $10
Qty. 2 Short Tang Commander (1 S.S. & 1 Blue) $10 ea.

80 Series
Qty. 4 Long Tang Govt. Blue $10 ea.
Qty. 2 Long Tang Govt. S.S. $10 ea.
Qty. 1 Short Tang Grooved Commander/Officers S.S. $10
Qty. 1 Short Tang Commander Refinished in Hard Chrome $10

#4. Colt Thumb Safety

70 Series
Qty. 3 Standard Blue (used) $15 ea.
Qty. 1 Standard S.S. (used) $15
Qty. 1 Standard Nickle (used) $15

#5. Colt Mainspring Housings

Pre 70 Series Light Weight Commander
Qty. 1 Arched Aluminum Black Anodized (used, very light finish wear) $20
Qty. 1 Arched Aluminum "In The White" (new?, refinish or use in stainless pistol) $20

70 Series Steel
Qty. 1 Arched Matte Blue $25
Qty. 1 Arched Matte Blue Complete Assembly (used, very light finish wear) $25
Qty. 2 Arched Matte Blue (used, very light finish wear) $15 ea.
Qty. 1 Arched Satin Nickle w/ Lanyard Ring (used, very light wear) $25
Qty. 1 Arched Nickle (used) $15

80 Series Synthetic
Qty. 1 Flat Grey for S.S. Pistol $5

#6. Sears/Disconnectors

70 Series Tool Steel Sears
Qty. 15 Government, Commander, Officers (uncut) $15 ea.
Qty. 5 Government, Commander, Officers (used, like new, from new guns) $10 ea.
Qty. 1 Gold Cup Complete Assembly $25

70 Series Tool Steel Disconnectors
Qty. 3 Government, Commander, Officers $10 ea.
Qty. 8 Government, Commander, Officers (used, from new guns) $5 ea.

#7. Magazines

USGI
Qty. 1 Post War Unmarked Blue (used, very light finish wear) $10

#8. Sights

70 Series Gold Cup (fits Python, Diamondback, etc.)
Qty. 1 Elliason Adjustable Rear Sight $75

#9. Aftermarket Custom Parts

Qty. 1 Original Kings Match/Target Barrel Bushing Govt./Commander Blue $20
Qty. 1 Wilson Shok Buff Recoil System for 9MM/38SUPER $20
Qty. 1 Wilson 8rd. Magazine Conversion 45ACP $5
Qty. 2 Clark Custom 2-Piece Govt. Guide Rod Matte Blue $15 ea.
Qty. 1 Wilson Extended Grip Safety High Ride Drop In Commander/Officers Matte Blue $25
Qty. 1 Wilson Extended Grip Safety High Ride Drop In Govt./GoldCup Matte Blue $25
Qty. 1 Pachmayr Extended Combat Grip Safety Low Profile Rubber Coated Drop In Commander $15
Qty. 1 Videcki Lightweight Aluminum 3 Hole Adjustable Long Trigger $15
Qty. 1 Greider Lightweight Aluminum 3 Hole Adjustable Long Trigger $15
Qty. 1 Chip McCormick Super Lightweight Aluminum 3 Hole Adjustable Long Trigger $15
Qty. 2 Swenson Extended Thumb Safety Blue $10 ea.
Qty. 1 Ed Brown Extended Ambidextrous Thumb Safety Matte Black $35
Qty. 1 Les Baer Extended Ambidextrous Thumb Safety S.S. $45
Qty. 1 Mueschke Extended Ambidextrous Thumb Safety Blue $20
Qty. 1 Pachmayr Arched Checkered Rubber Coated Mainspring Housing $15
Qty. 1 Pachmayr Flat Checkered Rubber Coated Mainspring Housing $15
Qty. 1 STI S7 Tool Steel Sear $15
Qty. 1 Nighthawk Custom Tool Steel Hammer Matte Blue $45
Qty. 1 Wilson Value Line Speed Hammer Blue $20
Qty. 1 Ed Brown White Dot Front Sight Stake On Narrow Tenon $5
Qty. 1 STI Firing Pin Stop Blue Cut for Bo-Mar $7
Qty. 1 Novak Adjustable Extreme Duty LoMount Rear Sight Standard Dovetail White Dot Matte Black (appears new) $55
Qty. 1 Wilson Bullet Proof Extractor 70 & 80 Series Blue $25
Qty. 1 Wilson Magazine Well S.S. Attaches to Grip Screw Frame Bushings $20
Qty. 1 Clark Combat Magazine Well Low Profile Matte Blue Attaches to Grip Screw Frame Bushings $20
Qty. 5 Shooting Star Magazine Followers $5 ea./all for $20
Qty. 1 Vintage Clark Custom 7" Match Barrel 45ACP Correctly Throated Bore Gauges .443" Not Fitted (new?) $100
 

·
Registered
Joined
·
1 Posts
I am interested in the Pachmayr flat checkered mainspring housing. I can't see a way to send a personal message, so please contact me at tjk at gentledarkness dot com.

Thank you.

Tom
 
1 - 2 of 2 Posts
Top