[paintmanmatt]

Available as of 08/10/2019................

In the process of updating items and counts, may take a couple of days...


Cocking Lever and Pin Set - Excellent condition, BA marked (Lever, pin not marked). Also have SG (not pictured)

..............$30 shipped (conus)




Cocking Lever Pins - Excellent condition

..............$12 ea shipped (conus)





Barrel Bands - large, NOS

.............$5 ea shipped (conus)...(20+) Available




Front Cartridge Stop Rivet - 30.06, new production. This is the fat rivet for the front right of the feed tray area. The Stop for 30.06 or stud for other caliber stops to fit over. Parkerized

...............$15 ea shipped (conus)





Complete Firing Pin - no maker's mark SPRING SETS BACK IN STOCK!!

..............$15 ea shipped (conus) ......Several Available..............Each Firing Pin comes with (1) new production spring set.





Belt Holding Pawl NO/Spring - USGI, 30.06

............Now $8 shipped (conus)





Spring, Belt Holding Pawl - very good condition

..................................$4 ea shipped (conus)





Drive Rod Assemblies - No Springs. Early type (zinc park) Late type (manganese park)

..................................$12 ea shipped (conus) Several Available




Drive Springs, main - appear to be NOS

.................................$11 ea shipped (conus)





Pin, breech block/accelerator - Some in the white, some parked. Specify which one's you'd like.

.................................$5 ea shipped (conus) ....Several Available





Accelerators...................SG or NIW (luck of the draw).....$8 ea shipped (conus)


.....................................RIA marked.....$10 ea (3 available)




.....................................BA...................$10 ea (in the white)





Buffer & Adjusting Screws.........USGI (no Hebrew markings). Most are covered in cosmoline. Cleaned up a handful to confirm condition.

...............Adj Screw only..............$5 ea shipped (conus)
..............Buffer & Screw Set.........$8 ea shipped (conus)





Trigger Pins -

Pin Only.............$7 ea shipped
Spring Only........$3 ea shipped
Pin/Spring Set....$9 ea shipped





Top Cover Latches - 1pc Cast or 2pc milled/riveted, your choice

...................................$12 ea shipped (conus) .....Several Available





Top Covers, Stripped - Izzy modified to 7.62.....AND Original USGI 30.06.......your choice! Also have (2) BA, Izzy modified

....................................$25 ea shipped Several Available







Fixed Plates (for Top Cover Hinge).....no makers mark (BA has been sold)

....................................$10 ea shipped





BHP Pins - NOS

..................................$6 ea shipped......Back in STOCK





Barrel Shroud Set Screws - New Production/in the white

..............$3 ea (3 Available) Several Available




Extractor Spring / Top Cover - NOS.....

.............$6 ea shipped (conus) (20+) Available





Top Cover Slides - Stripped, Israeli (7.62 nato). Great condition.

.................................$6 ea shipped (conus) ...3 Available




Feed Levers - for Top Cover

............$10 ea shipped (conus) (20+) Available





Feed Lever PIVOT PINS - NOS

.............$7 ea shipped (conus) ...5 Available





Barrel Extensions - Excellent Condition. Mostly SG.

...................................$25 ea shipped (conus) SOLD OUT





Breech Blocks - Excellent condition. Have several manufacturers, check with me if you need something specific.

............................$8 ea shipped (conus) ...(26) Available





Breech Lock Cam - Most are SG marked, (5) RIA, (2) BA, several unmarked markings available...

..............$12 ea shipped (conus)...several Available






Short Round Stops - NOS, In the Wrap. USGI for 30.06

..................................$15 ea shipped (conus) .....(1) Available





Sear Springs - Excellent - NOS condition. Some are still sealed in Israeli blister packs.

...................................$7 ea shipped (conus)





P-38 Can Openers - New Production. Dimensions line up perfect with the one I got out of an old MRE pack

Add (1) to any other item/items in this or any other for sale thread of mine for $1 ea......or buy them separate for:

...............................(6) pcs for $8 shipped (conus)
...............................(10) pcs or more - $1 ea plus actual shipping (approx $3 up to 75 roughly)





Charging Handles - Assorted styles. Out of the notched w/nipple (Izzy modified). Let me know which type you would like, or I will just grab one off the top.

..............................$8 ea shipped (conus) ...Several Available





Barrel Plungers - Excellent condition. NO SPRINGS.

..............................$7 ea shipped (conus)





Sight Blades - Dovetail.

..............$4 ea shipped (conus)





Stock Springs - with correct screw and washer

.............$12 ea shipped (conus) .....(3) Available





Barrel Lock Springs - USGI. All remaining are loose Springs in Excellent condition.

.............$5 ea shipped ....Several Available(conus)





M13 Spare Parts Rolls - NOS

..............$12 ea shipped (conus) will cut you a break if you want multiples on these





Small Parts Pouches - USGI, rubberized. D39347

...............$3 ea shipped - with any other item (or multiple pouches) ...Several Available





Belt Holding Pawl - Israeli 308 (no springs)

...............$18 shipped (conus) SOLD OUT, more on the way

 

[autofire]

Matt put me down for
2 barrel plungers and springs
2 top cover latches 2pc type

Thanks

 

[steamer]

Matt
I will take the 1 -2 pc latches and 3 stripped firing pins
Steamer

 

[Chase3]

I would like to buy an Izzy booster socket, do you accept paypal?

 

[paintmanmatt]

I would like to buy an Izzy booster socket, do you accept paypal?

Chase3, yes.....I can accept paypal. You don't have private message access yet, so email me at: magerATtampabay.rr.com

Thanks, Matt

 

[Chase3]

Chase3, yes.....I can accept paypal. You don't have private message access yet, so email me at: magerATtampabay.rr.com

Thanks, Matt

Sent you an email regarding my order

 

[theduke]

Matt

I 'll take these...all.3.Please.

Barrel Plunger w/Spring -

...........$8 ea shipped (conus) .....(3) available.


also need some Booster caps you had listed in another ad if you have any left.....lmk what you have.

Thanks

Dan in Oregon

 

[Tom S]

Booster Bearing Socket & Complete Barrel Extensions

If you still have the following I would like to purchase:

1 ea. Complete Barrel Extensions - USGI F/A (not altered). Each includes: Bbl. Ext, Breech Block, Br Blk. Pin, Bbl. Spring $35 ea. shipped

1 ea. Booster Bearing Sockets $15 ea. Shipped.

Please email me and let me know if you have them and how to pay for them.
Thanks
Tom S
[email protected]

 

[sharab85]

I will take 1 cast top cover latch.

Thanks,

Shawn

[email protected]

 

[paintmanmatt]

Items added and counts updated...............

Thanks, Matt

 

[steamer]

Breech Lock Cam - (1) RIA (1) SG

.............$12 ea shipped (conus)

I'll take em

Scooter

 

[autofire]

Matt
I'll take
3 buffer plates and adj screws
RIA breech block
Top cover latch cast

 

[paintmanmatt]

List of available parts updated..............

Thanks, Matt

 

[eldon russell]

Spare parts

Matt. If you have any left, I would like two Accel/Breech lot pins. My zip is 37388. Thanks Ed

 

[RonC]

Matt, I will take the following parts, if available. pm or email payment info. please.

1 firing pin
1 extractor spring
2 sear springs
1 Barrel plunger w/spring

Thanks, RonC @ zip code 37377
hrcrosslin at gmail dot com

 

[R3Oscar]

Need these

Hello, please put me down for the following:

Barrel Lock Springs - USGI (1) at $5 ea shipped (conus)

BHP Pins - Excellent condition (1) at $5 ea shipped (conus)

Accel/Breech Blk Pins - Pin & Spring assembly (1) at $3 ea shipped (conus)

Drive Rod Assembly w/Spring - no visible markings, NOS drive spring included (1)

at $25 shipped (only 1 available)

Barrel Plunger w/Spring - (1) at $8 ea shipped (conus)

Stripped Firing Pin - "in the wrap", have no idea of manufacture (1) at $7 ea shipped (conus)


My math says $53? Here is my shipping Oscar Cantu, 507 S Main, San Antonio, TX 78204



REMEBER THE ALAMO.....LEAVE ON TIME!

 

[MSG]

If you still have them I would like:

1 x Barrel Lock Springs - USGI.........................$5 ea shipped
1 x Breech Block - (1) SG..............................$10 ea shipped
1 x Accel/Breech Blk Pins - Pin & Spring assy.....$3 ea shipped
1 x Barrel Plunger w/Spring.............................$8 ea shipped
1 x Buffer Plates & Adjusting Screw Set.............$8 per set shipped

I get $34.00

PM on the way. MSG

 

[MilitaryLane]

2 x BHP Pins $5 ea = $10
1 x Booster Bearing Sockets - USGI = $15
1 x Booster Bearing Sockets - Israeli = $15
1 x Stripped Firing Pin = $7

$47

e-mail me at [email protected]_cinci.rr.com for preferred method of payment.

 

[paintmanmatt]

2 x BHP Pins $5 ea = $10
1 x Booster Bearing Sockets - USGI = $15
1 x Booster Bearing Sockets - Israeli = $15
1 x Stripped Firing Pin = $7

$47

e-mail me at [email protected]_cinci.rr.com for preferred method of payment.

Replied via email (above address with underscores removed).

Thanks, Matt
863-242-8326

 

[pez34]

I will take

1 x Barrel Plunger w/Spring.............................$8 ea shipped

if still available? Will send PM shortly.