1919 A4 Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
716 Posts
Discussion Starter · #1 ·
18X1 to 5/8x24 Thread adapter for 9mm CZ SCORPION**-$69.99
http://usmachinegun.com/proddetail.php?prod=TA-SCORP58

18X1 to 1/2x28 Thread adapter for 9mm CZ SCORPION-$69.99
http://usmachinegun.com/proddetail.php?prod=TA-SCORP

18X1 to 1/2x28 Thread adapter & Thread Protector for 9mm CZ SCORPION-$89.99
http://usmachinegun.com/proddetail.php?prod=CZ-1228-TPTC

Yugo M92 Thread Adapter to 5/8x24 (.308) $49.99
Yugo M92 Thread Adapter to AK (14x1LH) $49.99
1/2-28 to 24 MM (AR-15 to AK-74)$59.99
TA-0104 1/2-28 to 3/4-10 for M-11 9mm-Thread Adapter $69.99
1/2-28 to 5/8-24, AR15 to AR10 Thread Adapter $66.99
1/2x28 (9mm) to .578 x28 (.45 acp) $99.99
1/2X28 TO 14 X 1 RH Thread Adapter $59.99
AK-47 NON THREADED BARREL - THREAD ADAPTER-$54.99

Yugo M92 Thread Adapter to 5/8x24 (.308) $49.99
Yugo M92 Thread Adapter to AK (14x1LH) $49.99
1/2-28 2B HK 3 Lug 9mm Adapter $74.99
1/2-28 female to 1/2-28 male Thread Adapter/Thread Extender-$99.99
1/2-28 male to 1/2-36 female thread adapter $99.99
1/2-28 to 24 MM (AR-15 to AK-74)$59.99
TA-0104 1/2-28 to 3/4-10 for M-11 9mm-Thread Adapter $69.99
1/2-28 to 5/8-24, AR15 to AR10 Thread Adapter $66.99
1/2x28 (9mm) to .578 x28 (.45 acp) $99.99
1/2X28 TO 14 X 1 RH Thread Adapter $59.99
1/2x28 to M11 .380 (5/8/x11) Adapter $99.99
1/2x28 to M16 x 1 LH thread adapter $99.99
1/2x28(AR-15) to M26-1.5-.223/5.56to UZI 9mm $99.99
1/2x36 female to 1/2x32 male $99.99
1/2x36 female to UZI M26x1.5 $129.99
1/2x36 to 5/8x24 (AR15 9mm to AR10/.30 cal)$49.99
14x1 LH to 1/2x28 (AK47 to AR15) $59.99
3/4-10 to M26-1.5-M11 9mm to UZI 9mm $69.99
5/8-11 to 3/4-10, M11/380 to M11/9mm $79.99
5/8x24 Female to 5/8x18 Male $149.99
9/16x24 to .578 x28 (.40 to .45 cal) $99.99
9/16x24 to 5/8x24 (40 cal to .30 cal) $69.99
AK 47 M14x1 LH (.223/5.56) to 1/2x28 $69.99
AK-47 to AR-10 (14x1LH to 5/8x24) $69.99
AK74 24mm x1.5 RH to 5/8x24 $59.99
AR-15 NON THREADED BARREL to 1/2x28 $79.99
Female 1/2-28 thread to a male 1/2-36 $99.99
M10/11 9mm to M10 .45 acp Adapter (3/4x10 to 7/8x9)$74.99
M11 .380 to 1/2x28 $129.99
M11 9mm Short Thread Adapter 1/2-28 to 3/4-10 $42.99
MPA 10" .45 acp Barrel Adapter 11/16 to 7/8x9 $39.99


complete list of our thread adapters-
http://usmachinegun.com/products.php?cat=15

We also manufacture some custom adapters as well. Please call or email with any questions. [email protected]
 

·
Registered
Joined
·
716 Posts
Discussion Starter · #2 ·
Lower prices on selected thread adapters

Yugo M92 Thread Adapter to 5/8x24 (.308) $49.99
Yugo M92 Thread Adapter to AK (14x1LH) $49.99
Yugo M26x1.5LH to 1/2x28 **FOR USE WITH .223/5.56 ONLY-$49.99
1/2-28 2B HK 3 Lug 9mm Adapter $74.99
1/2-28 female to 1/2-28 male Thread Adapter/Thread Extender-$79.99
1/2-28 male to 1/2-36 female thread adapter $79.99
1/2-28 to 24 MM (AR-15 to AK-74)$59.99
TA-0104 1/2-28 to 3/4-10 for M-11 9mm-Thread Adapter $69.99
1/2-28 to 5/8-24, AR15 to AR10 Thread Adapter $66.99
1/2x28 (9mm) to .578 x28 (.45 acp) $99.99
1/2X28 TO 14 X 1 RH Thread Adapter $59.99
1/2x28 to M11 .380 (5/8/x11) Adapter $99.99
1/2x28 to M16 x 1 LH thread adapter $99.99
1/2x28(AR-15) to M26-1.5-.223/5.56to UZI 9mm $99.99
1/2x36 female to 1/2x28 male $99.98
1/2x36 female to UZI M26x1.5 $99.99
1/2x36 to 5/8x24 (AR15 9mm to AR10/.30 cal)$49.99
14x1 LH to 1/2x28 (AK47 to AR15) $59.99
3/4-10 to M26-1.5-M11 9mm to UZI 9mm $69.99
5/8-11 to 3/4-10, M11/380 to M11/9mm $79.99
5/8x24 Female to 3/4x10 Male Thread Adapter-$89.99
9/16x24 to .578 x28 (.40 to .45 cal) $99.99
9/16x24 to 5/8x24 (40 cal to .30 cal) $69.99
AK 47 M14x1 LH (.223/5.56) to 1/2x28 $49.99
AK-47 to AR-10 (14x1LH to 5/8x24) $49.99
AK74 24mm x1.5 RH to 5/8x24 $49.99
AR-15 NON THREADED BARREL to 1/2x28 $79.99
Female 1/2-28 thread to a male 1/2-36 $79.99
M10/11 9mm to M10 .45 acp Adapter (3/4x10 to 7/8x9)$74.99
M11 .380 to 1/2x28 $129.99
M11 9mm Short Thread Adapter 1/2-28 to 3/4-10 $42.99
MPA 10" .45 acp Barrel Adapter 11/16 to 7/8x9 $39.99
Ruger 10/22 Slide Over Thread Adapter to 1/2x28-$49.99

We also manufacture some custom adapters as well. Please call or email with any questions. [email protected]
 

·
Registered
Joined
·
307 Posts
Cut Back?

I was looking at the M11 .380 to 1/2x28 thread adapter and was thinking about being able to put my Octane 45 on my M11 but was curious why you went with a short inner diameter that requires the barrel to be cut back? Is there something I'm missing? Would a normal length adaptor not work?
 
1 - 3 of 3 Posts
Top